Service Videos

Why is your Toyota Slip Indicator light on? It's because one or more wheels begin to spin (slip), the slip indicator flashes to indicate that Vehicle Stability Control (VSC) and/or Traction Control (TRAC) are operating in order to regain traction. If the light stays on, it could indicate a malfunction in: the VSC system or the TRAC system. Failing to investigate the cause of the warning may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by Toyota of Seattle immediately.

Why is your Toyota Master Warning light on? If you hear buzzer sounds and the warning light comes on and flashes, your vehicle has indicated that the master warning system has detected a malfunction. Follow the instructions of the message on the multi-information display. If any of the warning messages are shown again after the appropriate actions have been performed, contact Toyota of Seattle.

Why is your Toyota SRS Warning light on? Have the vehicle inspected immediately. Failing to investigate the cause of this warning may lead to the system operating abnormally and possibly cause an accident. This light indicates a malfunction in: the SRS airbag system, front passenger occupant classification system, or the seat belt pretensioner system. Have the vehicle inspected by Toyota of Seattle immediately.

Why is your Toyota Low Fuel light on? For L grade models, warning light indicates that remaining fuel is approximately 2.2 gal. (8.3 L, 1.6 lmp. gal.). For other models, warning light indicates that remaining fuel is approximately 2.4 gal. (9.1 L, 2.0 lmp. gal.). Refuel the vehicle.

Why is your Toyota Power Steering Warning light on? Have the vehicle inspected by your Toyota of Seattle immediately. Warning light indicates a malfunction in the EPS system. Failure to investigate the cause of this warning may lead to the system operating abnormally and possibly cause an accident.

Why is your Toyota ABS Warning Light on? Warning light Indicates a malfunction in the ABS or the brake assist system. Have your vehicle inspected by Toyota of Seattle immediately.

Why is your Toyota Tire Pressure Warning light on? When the light comes on: Low inflation pressure. Correction procedure: Adjust the tire inflation pressure. The light will turn off after a few minutes. If the light does not turn off even after the tire inflation pressure is adjusted, have the system checked by your Toyota of Seattle. When the light stays on after blinking for 1 minute: Malfunction in the tire pressure warning system. Correction procedure: Have the system checked by Toyota of Seattle.

Why is your Toyota Malfunction Indicator (Check Engine) light on? Warning light indicates a malfunction in: the electronic engine control system, the electronic throttle control system, or the electronic automatic transmission control system. Have the vehicle inspected by Toyota of Seattle immediately.